IEI Integration PPC-37xx-N270 v2.20 - Manual (Page 68)

PPC-37xx-N270 Panel PC
Page 54
4.11.4 Cabinet and Rack Installation
The PPC-3708A-N270, PPC-3710A-N270 and PPC-3712A-N270 flat panel PC can be
installed into a cabinet or rack. To do this, please follow the steps below.
4.11.4.1 PPC-3708A-N270
Step 1: Slide the rear chassis of the PPC-3708A-N270 flat panel PC through the
rack/cabinet bracket until the aluminum frame is flush against the front of the
bracket (Figure 4-30).
Figure 4-30: The Rack/Cabinet Bracket
Step 2: Insert the rack mounting clamps into the pre-formed holes along the edges of
the PPC-3708A-N270, behind the metal frame. The required number of
mounting clamps should be eight.
Step 3: Tighten the screws that pass through the rack mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the bracket
(Figure 4-31).