3 serial device connection, Figure 4-34: lan connection – IEI Integration PPC-37xx-N270 v2.20 User Manual

Page 72

PPC-37xx-N270 Panel PC

Page 58

Figure 4-34: LAN Connection

Step 3:

Insert the LAN cable RJ-45 connector.

Once aligned, gently insert the LAN

cable RJ-45 connector into the onboard RJ-45 connector.

Step 0:

4.12.3 Serial Device Connection

The PPC-37xx-N270 has three single male DB-9 connectors on the bottom panel for serial

device connection. Follow the steps below to connect a serial device to the

PPC-37xx-N270 panel PC.

Step 1:

Locate the DB-9 connector

. The location of the DB-9 connector is shown in

Chapter 2

Step 2:

Insert the serial connector

Insert the DB-9 connector of a serial device into

the DB-9 connector on the bottom panel. See Figure 4-35.