IEI Integration PPC-37xx-N270 v2.20 User Manual

Page 52

PPC-37xx-N270 Panel PC

Page 38

Figure 4-13: CD Drive Cover Bracket Retention Screws

Step 4:

Attach the CD drive bracket to the CD drive. To do this, align the four retention

screw holes in the CD drive bracket with the retention screw holes on the side of

the CD drive. Insert four retention screws into the bracket on both sides of the

HDD.

Step 5:

Install the CD drive into the PPC-3712A by aligning the retention screw holes in

the sides of the CD drive bracket with the retention screw holes on the left panel

and inside the chassis. Insert the three retention screws.

Step 6:

Connect the CD-ROM SATA cable and power cable from the connectors on the

motherboard to the rear of the CD drive.

Step 0: