Amana Bottom Mount Refrigerator - Manual (Page 70)

B136SPK2 ¾" Side Panel Kit
RS1200001 70 November 1996
• Front panel bracket must fit in gap in front side
extrusion.
Bottom cabinet
extrusion
6. Line up holes in right side L-bracket with holes from
7 screws removed in step 4. Attach L-bracket to
back of refrigerator using screws removed in step
4.
7. Line up holes in left side L-bracket with holes in left
side edge of refrigerator back. Attach left side
L-bracket to back of refrigerator using 7 truss head
1/4" sheet metal screws provided in kit.
L-bracket
Slide
panel in
here
Left
L-bracket
Right
L-bracket