IPA Tools 9008-SE Super MUTT Standard Edition - Manual (Page 25)

25
REMOVING THE HEAD
In the event your Deluxe Super MUTT ® should need service or repair, the Super MUTT ®
has been designed so that the “Head” which contains all the electro-mechanical compo-
nents can be easily removed to simplify and reduce the cost of the packing and shipping
process. You will need only a phillips head screwdriver to remove the 8 screws that
attach the head to the cart body. See the illustrations below.
After removal of the eight screws, simply lift the head up from the cart body and pull the
battery cable up through the channel in the cart body. To reassemble, feed the battery
cables through the channel while lowering the head onto the cart body and reinsert the
eight screws.
BACK
LEFT SIDE / RIGHT SIDE
2 pieces 10-32 x 1 /
2
in. phillips
2 pieces 10-32 x 1 /
2
in. phillips
2 pieces 10 x 3 /
8
in. phillips
Air exhaust lines