Figure 2.2: device manager screen, Figure 2.2:device manager screen – Advantech 4718 User Manual
Page 19
13
Chapter 2
Figure 2.2: Device Manager Screen
You can check the Device Properties to see if your device is running
under "Full Speed" mode (USB 1.1) or "High Speed" mode (USB 2.0).
See figure 2.3 on the next page.
Note:
If your module is properly installed, you should
see the device name of your module listed on the
Device Manager tab. If you see your device name
listed, but marked with an exclamation sign “!”
(Fig. 2-4), it means your module has not been
correctly installed. In this case, remove the mod-
ule from Device Manager by selecting its device
name and press the Remove button. Then go
through the driver installation process again.