Brooks Instrument 5851E - Manual (Page 2)

Installation and Operation Manual
X-TMF-5851E-MFC-eng
Part Number: 541B104AAG
November, 2008 Brooks ® Model 5851E
This instrument contains electronic components that are susceptible
to damage by static electricity. Proper handling procedures must be
observed during the removal, installation or other handling of internal
circuit boards or devices.
CAUTION
Handling Procedure:
1. Power to unit must be removed.
2. Personnel must be grounded, via a wrist strap or other safe, suitable means before any printed circuit card or
other internal device is installed, removed or adjusted.
3. Printed circuit cards must be transported in a conductive bag or other conductive container. Boards must not be
removed from protective enclosure until immediately before installation. Removed boards must immediately be
placed in protective container for transport, storage or return to factory.
Comments
This instrument is not unique in its content of ESD (electrostatic discharge) sensitive components. Most modern
electronic designs contain components that utilize metal oxide technology (NMOS, CMOS, etc.). Experience has
proven that even small amounts of static electricity can damage or destroy these devices. Damaged components,
even though they appear to function properly, exhibit early failure.
Essential Instructions
Read this page before proceeding!
Brooks Instrument designs, manufactures and tests its products to meet many national and international
standards. Because these instruments are sophisticated technical products, you must properly install, use and
maintain them to ensure they continue to operate within their normal specifications. The following instructions
must be adhered to and integrated into your safety program when installing, using and maintaining Brooks
Products.
• Read all instructions prior to installing, operating and servicing the product. If this instruction manual is not
the correct manual, telephone 888-554-FLOW or 215-362-3700 and the requested manual will be provided.
Save this instruction manual for future reference.
• If you do not understand any of the instructions, contact your Brooks Instrument representative for
clarification.
• Follow all warnings, cautions and instructions marked on and supplied with the product.
• Inform and educate your personnel in the proper installation, operation and maintenance of the product.
• Install your equipment as specified in the installation instructions of the appropriate instruction manual and
per applicable local and national codes. Connect all products to the proper electrical and pressure sources.
• To ensure proper performance, use qualified personnel to install, operate, update, program and maintain
the product.
• When replacement parts are required, ensure that qualified people use replacement parts specified by
Brooks Instrument. Unauthorized parts and procedures can affect the product's performance and place the
safe operation of your process at risk. Look-alike substitutions may result in fire, electrical hazards or
improper operation.
• Ensure that all equipment doors are closed and protective covers are in place, except when maintenance
is being performed by qualified persons, to prevent electrical shock and personal injury.