I-View FE-5MIPN 5-Megapixels IR Vandal Proof Dome IP Camera - Manual (Page 42)

42
Pre-recording: The time you set to start recording before the scheduled time or the event.
For example, if an alarm triggers recording at 10:00, and the pre-record time is set as 5
seconds, the IP Camera starts to record at 9:59:55.
Post-record: The time you set to stop recording after the scheduled time or the event. For
example, if an alarm triggered recording ends at 11:00, and the post-record time is set as 5
seconds, the IP Camera records until 11:00:05.
Overwrite: If you enable his function and the HDD is full, the new record files overwrite
the oldest record files automatically.
Keep days: If you enable his function and the HDD is full, the new record files will be
stop save into the HDD when the storage days over your setup volume of Keep days.
Make sure the size of storage media allow to save video clips which setup volume of “Keep
days” mode.
Record path: Select the recording media via FTP server or SD card.
To configure record settings, please make sure that you have the network storage device within
the network or the SD card inserted in your IP camera.