I-View FE-5MIPN 5-Megapixels IR Vandal Proof Dome IP Camera - Manual (Page 39)

39
I/O & PTZ setup: You can setup the alarm input/output and PTZ protocol from this section.
PTZ: Setup the PTZ parameters such as Baud rate, protocol and ID address. (Option)
Alarm I/O: Alarm input: Setup the name of alarm input and define the level of trigger single.
Alarm output: Setup the name of alarm output; define the mode (NC or NO) and trigger period.
(0 ms: Continue trigger)
Alarm Trigger: You can setup the image motion
trigger and sensor alarm trigger from this section.
The detail process show as below: