I-View FE-5MIPN 5-Megapixels IR Vandal Proof Dome IP Camera - Manual (Page 19)

19
Advance setup: Click this icon will enable the detail parameters setting of IP camera. You need
to load the Active X if this NVR is activated this process at first time.
The difference IP camera brand has its own “Find” and “Advance setup” setup diagram and
setting process. For the detail information, please refer to the IP camera operation menu.
HTTP port & RTSP port: The both port number must be matched the setting of IP camera..
Display streaming: You can select the “Dual streaming” or “Same as recording” mode; If
you select the “Dual streaming” mode, the live display video will show lower resolution
(320*240) for split video and higher resolution (same as recording resolution; such as
1920*1080) for pop-up to single video on the screen. This Dual streaming mode for live
display can save a huge CPU loading when decoding the video streaming.
Capture audio: You can record sound by microphone from audio input port of IP camera.
Synchronization with the DVR time: Check to synchronize the time of IP camera with DVR.
Condition (AWB): Choice the parameters to suit for the camera install location.
Reboot: Click this icon will reboot the IP camera. .
Setup: Click this icon for detail setting of IP camera; you may not need to I.E. Browser for the
detail IP camera setting. Please refer the diagram as below (For I-View’s IP camera only):
The detail NVR software operation, please refer to the Witness Pro software operation file
which built in the CD.