I-View FE-5MIPN 5-Megapixels IR Vandal Proof Dome IP Camera User Manual

Page 30

UPnP: Click this button to enable the UPnP (Universal Plug and Play) function.

UPnP™ is a networking architecture that provides compatibility among networking equipment,

software and other hardware devices. The UPnP protocol allows devices to connect

seamlessly and to simplify the implementation of networks in the house and corporate

environments. With the function enabled, you don’t need to configure the port mapping for

each port, and the camera is connected to the Wide Area Network via the router.

1. Check “Enable UPnP™ icon from settings interface.

2. Click Edit icon to select the Protocol and then entry the Internal/External Port.

3. Click Add icon to increase this port. Repeat the 1-3 to add another port.

4. Click Save icon to save the setting.

You can edit the Friendly Name of the IP Camera. This name can be detected by corresponding

device, such as a router.