I-View DM-5MIPN30 5-Megapixels IR Vandal Proof Dome IP Camera - Manual (Page 27)

27
3-3.
Setting IP camera for Witness Pro NVR software
Click “ Start “ >> “ All Programs” >> “Witness NVR32 Pro”, then select the “ Video
Parameters setup-ezSetup” accessory program to setup the parameters. You will see the diagram
as below
Disable channel: This will disable the selected channel when enable this function.
Install video codec: Install the video codec, if you connect IP camera at first time.
Vendor & Model: Select the correct brand and model for the connected IP camera. You also
Fig A Fig B