I-View DM-5MIPN30 5-Megapixels IR Vandal Proof Dome IP Camera - Manual (Page 22)

22
Adjust the Panning, Tilting & Rotation while watching the monitor
1)
Use the Hexagon wrench to loosen the bolt and to rotate the bracket to suitable position.
2)
You can adjust camera to any direction by using Pan and Tilt mechanism.
Pan Base moves by 176˚ to each side direction and 352˚ on the whole.
Loosen the tilt securing screw to change the direction and the Tilt base covers total 73˚
angle (0˚ ~ 73˚), to tighten the tilt securing screw after adjusting the tilt view angle.
3)
Use the Hexagon wrench to tighten a bolt after adjusting the camera.
2-2.
How to adjust lens focus
1)
Loosen the bolt and take off the dome cover.
2)
Using the “ + “ type screwdriver to loosen the LED cap.
3)
Take off the LED cable from LED cap.
4)
Unscrew the zoom & focus controller to adjust the near /far view angle; then adjust the focus