I-View Digi-4800XP 16 channels Hybrid Embedded DVR - Manual (Page 29)

29
2-5.
HDD Installation
The Platform of Digi-1648Pro/3248Pro/3296Pro comes with 1 IDE sockets (1
st
and 2
nd
IDE) and 7
(5+2; 2 HDDs for backup) pcs x SATA II sockets. The DigiCap II series DVR support up to 6 pcs x
SATA II HDD.
The default setting of the manufacture for the 1
st
IDE socket is used of the DVD+-RW and
flash memory.
Please follow the steps below to install the Series ATA/SATA II Hard disk.
Step 1.
Remove the case cover of the DigiCap II Series DVR.
Step 2.
Use the SATA/SATA II cable(s) to connect with the hard drive(s) (SATA II HDD) and
the motherboard connectors(s) (SATA cable for the SATA II slot) as showing in Fig.
2-6.1.
If user tries to install the SATA/SATA II hard drive(s) for DigiCap II image storage, please
use SATA cable(s) to connect with the SATA/SATA II/III hard drive(s) and the
motherboard SATA slots for optimum data transmission performance.
Step 3. Connect the inner power cables with each hard drives as showing in Fig.2-6.2.
Fig. 2-6.1 SATA socket