ABUS TVIP32500 - Manual (Page 78)

78
4.15 Password prompt
When delivered, an administrator password is already defined for the network camera. However, the
administrator should define a new password immediately for security reasons. After the new administrator
password is stored, the network camera asks for the user name and password every time it is accessed.
The administrator account is set up in the factory as follows: user name “admin” and password “12345”. Each
time the network camera is accessed, the browser displays an authentication window and asks for the user
name and password. If you can no longer access your personal settings in the administrator account, you can
log in again with user name “admin” and password “12345” after resetting the network camera to the factory
settings.
To enter a user name and password, proceed as follows:
Open Internet Explorer and enter the IP address of the camera (e.g. “http://192.168.1.14”).
You are then prompted for authentication:
-> You are now connected with the network camera and can see a video stream.
4.16 Accessing the network camera using an RTSP player
You have the option to access the MPEG-4/H.264 data streams on the network camera with an RTSP-
compatible media player. The following free media players support RTSP:
 VLC Media Player
 Real Player
 Quicktime Media Player
The address format for entering the connection data is as follows:
rtsp://:/
Example:
rtsp://192.168.1.14:554/video.mjpg (MJPEG stream)
rtsp://192.168.1.14:554/video.mp4 (MPEG-4 stream)
rtsp://192.168.1.14:554/video.h264 (H.264 stream)
Standard user name: admin
Standard password: 12345