ABUS FU9080 Privest Wireless Outdoor Siren - Manual (Page 19)

19
[9][2][2] Strobe blink
Defines the number of flashes per minute.
[9][2][2]
[1]..[5]
Strobe blink
[1] 20 times per minute
[2] 30 times per minute
[3] 40 times per minute [4] 50 times per minute
[5] 60 times per minute
[9][2][3] Strobe arm squawk 01 Range: 01-20
seconds
Defines the time the sounder continues visual acknowledgement.
NOTE:
If visual acknowledgement is deactivated, this setting is irrelevant.
[9][2][4] Volume
Defines the volume of the sounder for different signallings.
[9][2][4][1] Ex/En volume
The audible signal that is issued during the entry and exit delay
period.
Factory default: 0 (no signal)
[9][2][4][2] Alarm volume
The audible signal issued on an alarm.
Factory default: 9 (loudest setting)
[9][2][4][3] Squawk volume
The audible signal issued after arming the system
Factory default: 9 (loudest setting)
[9][3] Communication Test
Tests communication between the system and the sounder.
To access the Comm test menu:
1. In the programming menu, press [9] to access the Siren menu.
2. In
the Siren menu, press [3] to activate the communication test. The system
displays the signal strength.
IMPORTANT:
For a successful test, the displayed signal strength must be higher than the
signal strength reached under menu option 4 for the background noise.
(menu option [9][4])