Ironwood Electronics GHZ LGA Socket (-M) Assembly Instructions User Manual

Socket, M) assembly instructions

Socket
Top Assembly

Compression Screw

Compression plate

BGA Package

Z-Axis Angle Elastomer

Note: Do not remove.
It is placed in a specific
orientation and attached
to the four corners using
special adhesive.

Socket Base Assembly

Machine Screw

Socket Lid

Socket

(-M)

Assembly Instructions

Tele: (800) 404-0204

www.ironwoodelectronics.com

1. Place LGA package (land side down) into the socket. NOTE: LGA orientation on target PCB is critical.

2. Place the compession plate on top of the LGA package.

3. Install the socket top assembly with the hardware provided (four 0-80 screws).

4. Turn the compression screw clockwise, until it makes contact with the compression plate.

5. Turn an additional 1/8th to 1/4th of a turn.

page 1 of 1

Filename: GMI.mcd, Rev C, 6/26/01, IP