FIAT Panda User Manual

Page 77

START&STOP SYSTEM

(for versions/markets, where provided)

INTRODUCTION

The Start&Stop system automatically stops the
engine when the car is stationary and starts it again
when the driver wants to move off. This reduces
consumption, the emission of harmful gases and
noise pollution.

The system activates every time the car is started.

OPERATING MODES

Engine stopping mode

With the car stopped, the engine stops with gearbox
in neutral and clutch pedal released.

Restarting the engine

Press the clutch pedal to restart the engine.

Note The engine can only be stopped automatically
after driving at a speed of more than about 10 km/h,
to prevent the engine from being repeatedly stopped
when driving at walking pace.

The

symbol appears on the display when the

engine stops.

MANUAL SYSTEM ACTIVATION/
DEACTIVATION

To activate/deactivate the system manually, press the
button

fig. 64 on the dashboard control trim.

Start&Stop system activation
When the Start&Stop system is activated, the LED
above button

is off.

Start&Stop system deactivation
When the Start&Stop system is deactivated, the LED
above the

button is on.

ENGINE STOPPING FAILURE CONDITIONS

When the system is active, due to comfort, emission
control and safety reasons, the engine does not
stop in some conditions, among which:
❒ engine still cold;
❒ especially cold outside temperature;

fig. 64

F0W0044

GETTING TO

KNOW YOUR CAR

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX