FIAT Panda - Manual (Page 140)

❒ using the wrench provided, tighten the fastening
bolts;
❒ lower the car and remove the jack;
❒ using the wrench provided, fully tighten the bolts
in the sequence shown previously.
Versions with alloy wheels
❒ insert the wheel on the hub and using the wrench
provided tighten the bolts;
❒ lower the car and remove the jack;
❒ using the wrench provided, fully tighten the bolts
in the sequence shown;
❒ reinstall the pressure-fitted hub cap, making sure
that the reference hole on the wheel is aligned
with the reference hole on the cap.
IMPORTANT If it is not fitted properly, the hub cap
may detach itself when the vehicle is running.
At the end of operation
❒ stow the space-saver wheel in the compartment
provided in the luggage compartment;
❒ insert the jack and the other tools in the
container;
❒ arrange the container and tools on the space-saver
wheel;
❒ correctly reposition the boot mat.
"Fix&Go Automatic" kit
It is located in a special container in the luggage
compartment fig. 107. The container also contains a
screwdriver and the tow hook.
The kit fig. 107 contains:
❒ bottle A containing sealer and fitted with:
❒ filling pipe B;
❒ sticker C bearing the notice “max. 80 km/h”, to be
placed in a position visible to the driver (on the
instrument panel) after fixing the tyre;
❒ a compressor D including a pressure gauge and
connections, found in the compartment;
❒ instruction brochure (see fig. 109), to be used for
prompt and correct use of the tyre quick repair
kit and then to be handed to the personnel
charged with handling the treated tyre;
fig. 107 F0W0093
136
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX