FIAT Panda - Manual (Page 150)

❒ turn and remove the bulb holder E;
❒ release and replace the bulb;
❒ refit the new lamp and carry out the procedure
described previously in reverse.
SIDE LIGHTS/DAY LIGHTS (DRL)
(for versions/markets, where provided)
Replace the bulb as follows:
❒ steer the wheel completely;
❒ adjust the screws A fig. 118 and remove the flap B;
❒ adjust the catch C fig. 120 and disconnect the
electrical connector D;
❒ turn and remove the bulb holder E;
❒ release and replace the bulb;
❒ refit the new lamp and carry out the procedure
described previously in reverse.
REAR LIGHT CLUSTERS
These contain the bulbs for the side lights, brake
lights and direction indicators. The reversing lights
and rear fog lights are located instead in the rear
bumper.
fig. 117 F0W0209
fig. 118 F0W0197 fig. 119 F0W0198
146
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX