FIAT Panda User Manual

Page 151

To change the bulb proceed as follows:
❒ slacken the two screws fig. 121 from their seats,

pull gently outwards until releasing the whole
headlight from the two clips (press-fitted D

❒ undo the five screws B from their seats and

remove the bulb holder C fig. 122;

❒ remove the bulbs, pushing them slightly and

turning them anti-clockwise;

❒ refit the new lamp and carry out the procedure

described previously in reverse.

BRAKE LIGHTS

These are located in the tailgate and are LED lights.
For replacement, contact a Fiat Dealership.

FOG LIGHT/REAR FOG LIGHT

To change the bulb, proceed as follows:
❒ adjust the tabs A and remove the flap B fig. 123;
❒ adjust the catch C and disconnect the electrical

connector D fig. 124;

fig. 120

F0W0069

fig. 121

F0W0310

147

GETTINGTO KNOW

YOURCAR

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN

EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

121) and release the connector;

fig.