FIAT Panda - Manual (Page 138)

❒ operate the device A fig. 104 to extend the jack
until the top of the jack B fig. 105 fits correctly
into the side member C (next to the mark
on
the side member);
❒ alert other passengers that the car is about to be
raised; all persons should be kept away from the
car until it has been lowered;
❒ fit handle D fig. 104 into the housing in device A,
operate the jack and raise the car until the wheel
is a few centimetres from the ground;
❒ remove the wheel cap after loosening the 3 fixing
bolts and finally loosen the fourth bolt and extract
the wheel (only for versions with wheel caps
fixed by bolts);
❒ make sure the contact surfaces between
space-saver wheel and hub are clean so that the
fastening bolts will not come loose;
❒ fit the space-saver wheel by inserting the first bolt
for two threads into the hole closest to the valve;
❒ take the wrench A fig. 103 and fully tighten the
fixing bolts;
❒ operate the jack handle D to lower the car. Then
extract the jack;
fig. 101 F0W0325
fig. 102 F0W0183 fig. 103 F0W0179
134
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX