8e6 Technologies Threat Analysis Reporter TAR - Manual (Page 37)

8
e
6 T
hreaT
a
nalysis
r
eporTer
Q
uick
s
TarT
G
uide
Quick Start menu instructions
For these Quick Start setup procedures, you will need your network administrator to pro-
vide you the LAN 1 and LAN 2 IP address and subnet mask, gateway IP address, DNS
server IP address(es), host name of the server, and IP address for the Web interface (if
using a NAT device).
Login screen, password prompts
The login screen displays after powering on the Threat Analysis Reporter unit using a
monitor and keyboard, or after creating a HyperTerminal session.
NOTE: If the screensaver currently displays on your screen, press the Enter
key to display the login screen.
A. At the login prompt, type in menu.
B. Press the Enter key to display the Password prompt.
C. At the Password prompt, type in the following: #s3tup#r3k
D. Press Enter to display the Quick Start menu screen: