XM Satellite Radio XDNX1V1 - Manual (Page 42)

42
strength . You can also press menu
and then press to scroll to and
highlight Signal Indicator . Press the
Select button . The Satellite and
Terrestrial bars show the strength of
the signal being received . If the
signal reception is good, press and
hold menu to return to the main
display screen .
7 Ensure onyX is tuned to channel 1 .
Upon power up, onyX should tune to
channel 1 by default, when it’s not yet activated . If it’s not on channel 1,
refer to “Listening to Satellite Radio” on page 55 to learn about how to
tune a channel .
8 If you haven’t done so, turn on your vehicle’s stereo system . Set it to
play input from the cassette source .
9 You should hear XM channel 1 through your vehicle’s stereo system . You
are now ready to activate your onyX .
10 The audio level output of the onyX can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle .
Refer to “Set Audio Level” on page 89 .
If the signal reception is good, but there is no audio when tuned to channel 1, be
sure the vehicle’s stereo system is set to the correct source, i .e ., cassette source
(step 8) . Also be sure that the audio level is set high enough to be heard (step 10) .
Refer to “Troubleshooting” on page 102 for additional help .
Signal Indicator
SATELLITE
TERRESTRIAL
Vehicle Installation