XM Satellite Radio XDNX1V1 - Manual (Page 105)

105
Troubleshooting
If this happens: Try this:
No audio when using
PowerConnect or FMDA • Check that your onyX and your vehicle’s FM
radio are tuned to the same FM channel .
• For PowerConnect, ensure you are using the
PowerConnect Vehicle Dock and PowerConnect
Power Adapter .
• If you are using the Vehicle Dock that came with
the Universal Xpress Car Kit, ensure that the FM
Transmitter in the onyX is turned On . Refer to
“Turn FM Transmitter On/Off” on page 98 .
No song title or artist name is
displayed • The information may not be available or updates
may be in progress .
Traffic and Weather channels
sound different from other
channels • These channels use a different audio technology
than other channels so they often sound
different from other channels .
The demo is playing • Your Magnetic Mount Antenna is not connected
or you are not receiving the signal . Check that
the antenna is connected properly and is not
obstructed .
• Press and hold the Select button for 10 seconds
to exit Demo Mode .
• You can disable Demo Mode . Refer to “Demo
Mode” on page 94 .