XM Satellite Radio XDNX1V1 - Manual (Page 17)

17
3 The dock mounting plate can be tilted in different directions .
Adjust as necessary for your particular vehicle . When the
orientation is correct, tighten the knob .
4 Clean the surface with the
alcohol preparation pad and
let it dry thoroughly .
5 Peel off the adhesive liner .
Position, press, and hold the
Dash Mount in place for 30
seconds .
IMPORTANT! Allow the Dash Mount adhesive to cure (dry) for a minimum of
2-4 hours before using the mount . The best adhesion occurs after 24 hours .
TIP! To remove, carefully lift the adhesive pad with your fingers or a spoon .
Warming the pad with a hair dryer for several minutes will help soften the
adhesive .
Knob Adhesive Foot Dock Mounting Plate