XM Satellite Radio XDNX1V1 - Manual (Page 102)

102
onyX has been designed and built to be trouble-free but if you experience a
problem, try this:
• Check that all connections are firm and secure .
• Make sure the vehicle power socket is clean and free of corrosion .
• Make sure you have connected the onyX as described in this User Guide .
Verify that the PowerConnect Power Adapter is plugged into the vehicle’s
cigarette lighter or power adapter socket, and that the LED on the
PowerConnect Power Adapter is lit (on) . If not, your vehicle may need to be
running to provide power to the socket .
If you see this on the screen: Try this:
Acquiring Signal • Make sure that the vehicle is outdoors with a
clear view of the sky .
• Make sure the Magnetic Mount Antenna is
mounted outside of the vehicle .
• Move the antenna away from any obstructed
area . For example, if you are parked in an
underground garage, you should receive a signal
after leaving the garage .
Check Antenna Connection • Make sure that the antenna cable is firmly and
securely plugged into the PowerConnect Vehicle
Dock . Make sure the cable is not bent or broken .
• Turn onyX Off, then On, to reset this message .
• If the message persists, most likely the
Magnetic Mount Antenna cable has been
damaged . Replace the antenna .
Troubleshooting