Uniden Data 2000 Wireless CDPD PC Card - Manual (Page 88)

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card
D-6
D.5 AT Commands/Reading the Configuration
AT Command Syntax Description of Command
AT ACTNEI? Read the current Active IP address from the
System Table.
Response: NEI n ddd.ddd.ddd.ddd
AT BOOTVER? Read the version of the boot code from
the System Table.
Response: Boot n.n (X) (Date Time)
AT CDPDVER? Read the CDPD version supported by this
modem from the System Table.
(Currently 1.1 is the only
version supported.)
Response: CDPD Version 1.1
AT CMPR? Read Data Compression Mode from
[CAT] [MDT][UDT][SPDT] a particular default table.
Response: Header Compression Flag 0 or
Header Compression Flag 1
(If the option is not specified, the modem
will read the Baud rate from the CAT.)
Header Compression O means Header
Compression is off, Header Compression 1
means Header Compression is on.
AT ECHO? Read Echo mode from the System Table.
Response: Echo 0 or Echo 1
Echo 0 means Echo is off, Echo 1 means
Echo is on.
AT EID? Read the EID programmed in the Modem
from the System Table.
Response: EID Parameter xxxxxxxxxxxx
(x = hexadecimal)