Uniden Data 2000 Wireless CDPD PC Card - Manual (Page 41)

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card
Uniden Data 2000 Installation and Operation Manual 2-33
2.6.6 Adding TCP/IP Protocol Support
To add TCP/IP Protocol Support, take the following steps:
1. Double-click on the Network icon in the Control Panel.
2. Click Add.
3. Click Protocol, then click Add.
4 From the Manufacturers box, select Microsoft.
5. From the Network Protocols box, select TCP/IP.
6. Click OK twice. Windows 98 installs the TCP/IP stack and
any other protocol it requires.
7. After the protocols are installed, click OK.
8. Restart Windows 98.
2.6.7 Connecting to the CDPD Network
To connect to the CDPD Network, take the following steps:
1. Double-click the new icon you created in the previous section.
2. A window should appear, displaying the progress of your
connection. Within a few seconds, the connection display
should show that a connection has been established. Once
this has occurred, you may minimize the window and
proceed with Windows 98 Internet programs such as web
browsers and e-mail.