View or change gpib interface settings, Figure 3-3. properties dialog box (mac os x), View or change gpib interface settings -6 – National Instruments NI-488.2 User Manual
Page 34
Chapter 3
GPIB Explorer (Mac OS X and Linux)
3-6
ni.com
View or Change GPIB Interface Settings
To view or change your interface settings, complete the following steps:
1.
Start GPIB Explorer as described in the
section.
2.
Click on your GPIB interface and click Properties.
The Properties dialog box appears.
Mac OS X
Figure 3-3 shows the Properties dialog box for a GPIB-ENET/100 for
Mac OS X.
Figure 3-3. Properties Dialog Box (Mac OS X)