NEC PlasmaSync 42PD3 - Manual (Page 42)

42
Ⅵ Ⅵ Ⅵ † P LASMA M ONITOR
Other Functions (OTHER SETTINGS)
Note:
■ Power Management Function
• The power management function is an energy-saving function that au-
tomatically reduces the power consumption of the monitor when the
keyboard or mouse have not been operated for a fixed period. This
function becomes valid when combined with a personal computer that
is based on the VESA DPMS system.
• When power is not being supplied to the personal computer or when
the personal computer and this monitor are not properly connected,
the power management function will operate and this monitor will en-
ter the "off state."
• Please see your personal computer user's manual for information about
the power management function of the personal computer side.
• During power management mode the fan may stop, but this is not a
malfunction.
Power Manage-
ment Mode
On State
Standby State
Suspend State
Off State
POWER/STANDBY
Indicator
Green
Yellow
Orange
Orange
Power Management
Operation Status
Not operating
Operating
Operating
Operating
Recovery Method
Not required since the personal computer is nor-
mally being used at this time.
Press a keyboard key or move the mouse. The
screen will be displayed immediately.
Press a keyboard key or move the mouse. The
screen will be displayed; however, it will take some
time from the standby state until the screen is dis-
played.
Press a keyboard key or move the mouse. The
screen will be displayed; however, it will take some
time from the standby state until the screen is dis-
played.
Details
Horizontal/vertical sync sig-
nals are being input from the
personal computer.
Horizontal sync signal is not
being input from the personal
computer.
Vertical sync signal is not
being input from the personal
computer.
Horizontal/vertical sync sig-
nals are not being input from
the personal computer.
POWER/STANDBY Indicator
The status of the power management function can be checked with the POWER/STANDBY indicator of the monitor.