NEC PlasmaSync 42PD3 - Manual (Page 27)

P LASMA M ONITOR Ⅵ Ⅵ Ⅵ †
27
4
Audio Settings (SOUND)
This menu sets the volume, balance, mute, and selection of input.
Note that only sound of the currently displayed signal is output.
Preparation Press the PROCEED button to display the main menu.
1 Align the cursor with
2
3
Move the cursor left and right with
the POSITION/CONTROL
ᮤ ᮣ
buttons.
VOLUME
BALANCE
MUTE
INPUT1
INPUT2
: OFF
: VIDEO
: RGB1
VOLUME
BALANCE
MUTE
INPUT1
INPUT2
: OFF
: VIDEO
: RGB1
VOLUME
BALANCE
MUTE
INPUT1
INPUT2
: OFF
: VIDEO
: RGB1
Align the cursor with the desired item
Adjust with the POSITION/CONTROL
ᮤ ᮣ buttons
Move the cursor up and down with
the POSITION/CONTROL
▲▼
buttons.
Press the EXIT button 2 times
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
Adjustment Screen
[VOLUME] : Adjusts the volume
[BALANCE] : Adjusts the left and right volume balance.
[MUTE] : Switches off the sound (temporarily)
[OFF] : There is sound.
[ON] : Sound is switched off.
[INPUT 1] : Each press serves to advance the audio input
of AUDIO IN 1 by one step.
[INPUT 2] : Each press serves to advance the audio input
of AUDIO IN 2 by one step.
RGB 3
DVD/HD VIDEO RGB 1 RGB 2 or
VIDEO
RGB 3 RGB 1 DVD/HD RGB 2 or
ᮤ Decrease Increase ᮣ
L R L R
ᮤ Left side becomes stronger Right side becomes stronger ᮣ
Note:
Adjustments of [VOLUME], [BALANCE], [MUTE] will be stored in memory
for each input (VIDEO, RGB 1-3, DVD/HD, and SCART). To change these
settings, first display the source of which audio input you wish to adjust.