NEC PlasmaSync 42PD3 - Manual (Page 41)

P LASMA M ONITOR Ⅵ Ⅵ Ⅵ †
41
Other Functions (OTHER SETTINGS)
4
1 Align the cursor with
2
3
Move the cursor left and right with
the POSITION/CONTROL
ᮤ ᮣ
buttons.
COLOR SYSTEM
P-ON MODE
POWER MANAGER
SET ID NO
RGB3 ADJUST
CINEMA PULLDOWN
STD/CINEMA
ALL RESET : AUTO
: OFF
: ALL
: 1
: ON
: STD
: LAST MEM
: AUTO
: OFF
: ALL
: 1
: ON
: STD
COLOR SYSTEM
P-ON MODE
POWER MANAGER
SET ID NO
RGB3 ADJUST
CINEMA PULLDOWN
STD/CINEMA
ALL RESET
: LAST MEM
Set the power management mode with
the POSITION/CONTROL ᮤ ᮣ buttons
Move the cursor up and down with
the POSITION/CONTROL
▲▼
buttons.
Press the EXIT button 2 times
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all the settings of the other functions
to the default settings.
This sets the functions that serve to automatically reduce power
consumption.
Set [OSD MODE] to [PRO] on the configuration menu, then per-
form the following operations.
Power Management Settings (POWER MANAGER)
Align the cursor with POWER MANAGER
[ON] : Power management function operates.
[OFF] : Power management is cancelled.
Preparation Press the PROCEED button to display the main
menu.
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all the settings of the other functions
to the default settings.
Press the EXIT button 2 times