Panasonic DP-2500/3000 - Manual (Page 159)

PRINTOUT JOURNALS AND LISTS
PR
IN
T
O
U
T
JOURNALS
AND
LIS
T
S
157
Explanation of contents
(1) Printout date
(2) Printout time
(3) Journal number
(4) Communication result : "OK" indicates that the communication was successful.
"BUSY" indicates that the communication has failed because of busy line.
"STOP" indicates that STOP was pressed during communication.
"B-OK" indicates that the Batch Transmission was successful.
(All batched files are listed below the batched transaction.)
"M-OK" indicates that the substitute reception message in memory was not
printed.
"P-OK" indicates that memory overflow or document misfeeding occurred while
storing the documents into memory for transmission but successfully stored
document(s) was sent.
"R-OK" indicates that the Relayed XMT or Confidential Communication was
successful.
"3-digit Info Code" (See page 169) indicates that the communication has failed.
(5) Number of pages transmitted or
received : The 3-digit number is the number of pages successfully transmitted or received.
When the documents are stored into memory, two 3-digit numbers will appear.
The first 3-digit number represents the number of pages successfully
transmitted. The second 3-digit number represents the total number of pages
that were attempted to be transmitted.
Asterisk "*" indicates that the quality of some received copies was poor.
(6) File number : 001 to 999 (If the communication is stored into memory, a file number is
assigned for each communication.)
(7) Duration of communication
(8) Type of communication : "XMT" means Transmission
"RCV" means Reception
"POL" means Polling
"PLD" means Polled
"FWD" means Fax Forward
(9) Remote station identification : Name : Recorded name in Phone Book. Numbers or remote station's Character
ID.
☎
number : Dialled telephone number (PIN code will not be shown)
Number : Remote station's ID number.
"
◆ " means communicated from optional 2nd G3 Fax Communication Port Kit.
(Line-2)
(10) Communication date
(11) Communication Start time
(12) Diagnostic : For service personnel only
(13) Own LOGO : Up to 25 characters
(14) Own ID number : Up to 20 digits
(15) Own Character ID : Up to 16 characters
(16) Type of communication : Transmission or memory transmission
(17) Destination : If a Phone Book Number was used for transmission:
Phone Book Number/Telephone Number/Recorded Name
If not : Telephone number
(18) Received remote station's ID : Character ID or ID number
(19) Resolution: : "STD" means Standard resolution
"FINE" means Fine resolution
"S-FINE" means Super-Fine resolution
(20) Line Number
Journals and Lists