Plantronics Voyager 510S - Manual (Page 8)

Plantronics Voyager 510 S Setup Guide
4
. Slide the Handset Lifter Arm under the handset until the lifter base touches
the side of the phone.
5.
Slide the Lifter up to where it nearly touches the handset earpiece and hold.
Slide Lifter under
handset, then up
toward the ear piece
B. Determine Lifter position and height setting
Lifter viewed
from back Start with Lifter
Height Switch in
lowest position
Handset Lifter Arm
To determine the lifter position and height setting, you will first need to power the
headset
on
and fit the headset.
1
. Press and hold the power/mute button on the headset for 3 seconds until the status
indicator flashes blue.
2
. Fit the headset over and behind your ear as described on page 3.
3.
Set the Lifter Height Switch to the lowest setting.
Status Indicator Power/Mute
Button