Plantronics Voyager 510S - Manual (Page 14)

1 Plantronics Voyager 510 S Setup Guide
Your Voyager 510S Bluetooth Headset System comes from the factory with the headset and
base already paired. However, if you have purchased a base unit separately, or if you wish to
use a replacement headset with your existing base unit, the units must be paired as follows:
Note: Make sure your headset is not connected to any other Bluetooth device when attempting
to pair.
1.
On the back of your base unit, press
and hold
both
the Speaking Volume
Minor Adjust Control buttons simul-
taneously until the on line indicator
light flashes blue and the power light
(on the front of the unit) flashes red.
2. On your headset, press and hold
both
the Listening volume adjust (+)
button and the Call Control Button
simultaneously until the red and blue
indicator lights flash alternately.
3. Pairing is complete when the
indicator light on the base is solid
blue and the Status Indicator light
on your headset flashes blue.
Pairing Headset and Base
Call Control Button & Talk/
On-line Indicator Light
Speaking Volume
Minor Adjust
Buttons
Headset Base
(back view)