Plantronics Voyager 510S - Manual (Page 16)

1 Plantronics Voyager 510 S Setup Guide
Re-dialing last number
• To activate last number re-dial, double click the Call Control Button. You will hear a high
tone for each key press. When you hear another tone, the last number has been
re-dialed.
Using voice dialing
• To activate voice dialing, press and hold the Call Control Button for 2 seconds until you
hear a second tone.
Note: To use voice dialing, the voice dialing feature must be enabled on your phone.
(This feature must be supported by both your carrier and cell phone. See your phone manual
for instructions).
Rejecting a call
• When receiving an incoming call, press and hold the Call Control Button. When you hear
two tones, the call has been rejected and you can release the button.
Transferring a call from your mobile phone to your headset
• To transfer an active call from your mobile phone to your headset, press the Call Control
Button for more than 2 seconds.
Transferring a call from your headset to your mobile phone
• To transfer an active call from your headset to your mobile phone, press the Call Control
Button for more than 2 seconds.
Muting a call
• To mute a call, press the Power/Mute button for less than 1 second. A single high tone
followed by a single low tone will sound.
• To take a call off of mute, press the Power/Mute button again for less than 1 second.
A single low tone followed by a single high tone will sound.
• Mute Reminder — A double low tone will sound every 30 seconds as a reminder that
mute is activated.
To Disable Online and Standby Indicator Lights
• When purchased, the headset will have the online and standby indicator lights enabled.
To disable these indicators, press the volume up button while turning the headset on . To
re-enable both indicator lights, turn the headset off; then press the volume up button
again while turning the headset
on
.
Note: This process only disables online and standby indicator lights when headset is
connected to a Bluetooth device, such as a mobile phone or base. All other indicator lights,
such as low battery, will continue to function.
Features and Options