Plantronics Voyager 510S - Manual (Page 11)

11 Questions?
For fast, efficient Technical Support call:
800-544-4660 Ext. 5538
u
sing your
V
oyager
510s h
eadset
with your desk Phone
Placing, Answering, or Ending Calls on your Desk Phone
Desk phone
Configuration
ALL phones with
Handset Lifter
Phones without Headset
button and NO Handset
Lifter
Phones with Headset button
and no Handset Lifter
To place a call 1. Press Call Control Button
2. Dial number
1. Press Call Control Button
2. Remove handset from cradle
3. Dial number
1. Press Call Control Button
2. Press Headset button on phone
3. Dial number
To answer a call 1. Press Call Control Button 1. Press Call Control Button
2. Remove handset from cradle
1. Press Call Control Button
2. Press Headset button on phone
To end a call 1. Press Call Control Button 1. Press Call Control Button
2. Place handset back on cradle
1. Press Call Control Button
2. Press Headset button on phone
For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause
hearing loss. Always listen at moderate levels. For more information on headsets and hearing
visit: www.plantronics.com/healthandsafety
To turn the headset on, press and hold the power/mute button for 3 seconds until the status
indicator flashes blue. (See Step 1 on page 8).
To turn off, press and hold the button again for 3 seconds until the status indicator flashes red.
Powering the Headset on and off
If your desk phone has a volume control, set it to mid-range.
To mute a call, press the Power/Mute button for less than 1 second.
To take the call off mute, press the Power/Mute button again.
Note: Pressing the Power/Mute button for more than 3 seconds will power off the headset.
Muting a Call