Plantronics Voyager 510S - Manual (Page 6)

Plantronics Voyager 510 S Setup Guide
c
onnect
P
ower and
c
harge
h
eadset
S
T
E
P
Insert into yellow labeled power
connection on Headset Base as
shown to charge.
Headset Base
(bottom view)
Base
Power
Adapter
1
. Plug the Base Power Adapter into a wall outlet, then plug the power cord into the yellow
labeled connector on the bottom of the Headset Base. The
red
Power light on the left
front of the Headset Base will turn on. (See illustration at bottom of page.)
A. Connect Headset Base to power outlet
1
. Gently push the headset into the charging cradle as shown below. The amber Charge Status
light on the base will flash to indicate the headset battery is charging. A solid light indicates
full charge. A full charge will take approximately 3 hours.
B. Charge the Headset for at least 20 Minutes before using
The headset may also be charged directly with the
Headset Travel Charger. Plug the headset travel charger
into a wall outlet, then plug the power cord from the
adapter into the headset. The indicator light will flash
red while the headset battery is charging. The light will
change to solid
blue
when the battery is fully charged.
Power
(R ed )
Charge Status
(A mbeR )