Plantronics Voyager 510S User Manual

Page 20

Plantronics, Inc.

345 Encinal Street
Santa Cruz, CA 95060 USA

www.plantronics.com

trademarks or registered trademarks of Plantronics, Inc. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any

use of such marks by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.

Patents U.S. 5,210,791; 6,735,453; 6,923,688; 7,075,270; D469,756; D512,984; D517,519; D519,498; D521,492; D523,412; Australia

147229; 303053; 303054; China ZL200530008543.X; ZL200530008542.5; EM 293964-0003; 293964-0004-0006; France 651,857-

651,865; Germany 40108524.4; GB Regd.Des.No. 2104923; Taiwan D112594 and Patents Pending.

Printed in USA.

76529-03 (06.07)

FCC REquiREmENTS
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which

can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or

more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on another circuit.
4. Consult the dealer or an experienced radio/TV technician for help.
FCC REGiSTRATiON iNFORmATiON — Part
This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the exterior of this equip-

ment is a label that contains a product identifier in the format US:AAAEQ##TXXXX. If requested, this information must be

provided to your telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the appli-

cable FCC Part 68 rules and requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with

this product. It is designed to be connected to a compatible jack that is also compliant. See installation instructions for details.
The REN is useful to determine the quantity of devices you may connect to your telephone line. Excessive RENs on a telephone

line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should

not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, contact

your local telephone company. For product approved after July 23, 2001, the REN for this product is part of the product

identifier that has the format US:AAAEQ##TXXXX. The digits represented by ### are the REN without the decimal point. (For

example, 03 represents a REN of 0.3.) For earlier producers, the REN is separately shown on the label.
If this telephone equipment causes harm to the telephone network, the telephone company will notify you in advance that

temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify

the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is

necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper

functioning of your equipment. If they do, you will be notified in advance in order for you to make necessary modifications to

maintain uninterrupted service.
If trouble is experienced with this unit, for repair or warranty information, please contact customer service at (800) 544-4660.

If the equipment is causing harm to the network, the telephone company may request that you disconnect the equipment

until the problem is resolved.
DO NOT DISASSEMBLE THIS EQUIPMENT: it does not contain any user serviceable components.
We recommend the installation of an AC surge arrester in the AC outlet to which this equipment is connected. Telephone

companies report that electrical surges, typically lighting transients, are very destructive to customer terminal equipment

connected to AC power sources.
ExPOSuRE TO RF RAdiATiON
The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations,

which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is

safe for use by consumers.