Panasonic AJ-D250P - Manual (Page 30)

30
INTERFACE menu
The underlining denotes the factory mode setting.
Setup Menus
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
200 BAUD RATE 0000
0001
0002
0003
0004 1200
2400
4800
9600
19200
For setting the RS-232C transmission speed (baud rate).
201 DATA LENGTH 0000
0001 8BIT
7BIT
For setting the RS-232C data length.
202 STOP BIT 0000
0001 1BIT
2BIT
For setting the RS-232C stop bit.
203 PARITY
0000
0001
0002 NONE
ODD
EVEN
For setting none, odd or even as the RS-232C parity bit.
0: The parity bit is not used.
1: Odd parity is used for the parity bit.
2: Even parity is used for the parity bit.
204 ACK RETURN
0000
0001 OFF
ON
For setting the RS-232C return data.
0: The ACK code is not returned.
1: The ACK code is returned.
205 232C ID SEL
0000
0001
D250
D230
For setting the RS-232C device ID.
0: The ID of the AJ-D250 is returned.
Use this setting when exercising control using the AJ-A250 or a
computer.
1: The ID of the AJ-D230 is returned.
Use this setting when exercising control using the AJ-A571.
When the AJ-A571 is used for control, the unit can be used as a player
VTR.