Lopi Yankee PS - Manual (Page 19)

Installation
(For Qualified Installers Only)
1 9
© Travis Industries
4080728
1 0 0 - 0 1 1 5 6
Installation Example: Freestanding Masonry Chimney
“L” Vent
Sections
6” Min.
“L” Vent
Storm Collar
Vertical Cap
Cover Plate (non-combustible)
Silicone
Seal the cover
plate with silicone.
Allow room for the
hopper lid to open
53-3/8”
Clean-Out Access
Seal each vent
section (including
adapters, elbows,
etc...) by injecting a
liberal amount of
500° F. RTV
silicone into the gap
between sections.
500
° F. RTV
Silicone
“L” Vent Flex
Section
Vent
Clearance*
* Install vent at clearance specified by the vent manufacturer.