Lennox Hearth JABRA PRO 9470 - Manual (Page 36)

36
english
Jabra PrO 9460, 9460-DuO anD 9470 user manual
the precise effect of each type of gesture depends on what you are currently doing (e.g., if you are already on a
call, which phone is the current target, etc.). the table below summarizes all of the control possibilities presented
by the multifunction button.
Function Tap Double-Tap
Press
(hold 1-3 sec)
answer incoming call

Open a connection on current target phone
(e.g., go to dial tone; voice-activated dialing)

enable voice-activated dialing (when target is a cell phone
that supports this)

end current call (and activate held or incoming call, if any)

Call the last number dialed on current target phone
(supported softphones and mobile phones only)

reject incoming call (when already on a call)

switch target phone (when no call is active)

reject incoming call (when no call is active)

hold current call and switch to held or incoming call
(supported softphones and mobile phones only)

Power off / power on

(hold 5 secs)
All multifunction button commands Table 4:
The Touch Panel
the headset features a touch panel that is similar to the touch pad included with many laptop computers. use it
to adjust the volume you hear in your headset and to mute/enable the microphone.
- slide your finger up the touch panel (away from your mouth) to increase the volume.
- slide your finger down the touch panel to decrease the volume.
- Double-tap on the touch panel to mute or unmute the microphone.
see also Section 6.6: Controlling the Speaker Volume and Microphone.