Konica Minolta Fax 9930 - Manual (Page 87)

|
Konica FAX 9930 72
5 Input the telephone number (LOC #), press Enter.
6 Input a name if desired (up to 15 characters), press Enter.
7 Input alternate telephone number (ALT#) if desired, press
Enter.
8 Select Communication Speed, press Enter.
9 Select On or Off for Echo Protection, press Enter.
10 Repeat the above process from Step 3 until you have
finished programming.
11 Press Menu/Exit to return the machine to standby mode.
12 When finished with the programming of One Touch
keys, lift off the plastic cover. Use a pencil to write the
name of the One Touch key you have programmed.
! Print the Telephone Directory when you finish
programming. This provides a reference of the speed
dial numbers already programmed.
See “Reports, Telephone Directory.”
Be sure to write the name for any Speed Dial numbers
you program on the One Touch Sheet(s).
The One Touch Sheet(s) provide space for Speed Dial
numbers 1 through 80. For Speed Dials 81 and above,
program the number(s) and print the Telephone
Directory. See “Reports, Telephone Directory.”