Konica Minolta Fax 9930 - Manual (Page 123)

|
Konica FAX 9930 108
Sending a Delayed Fax
1
Load the document(s).
2 Press Menu/Exit to enter Menu.
3 Press
ᮢ or ᮡ to access Delayed TX. Then press Enter.
4 Press
ᮢ or ᮡ to move between date and time settings,
and
ᮣ or ᮤ to move between columns.
5 Input the desired date and time using the numeric
keypad, press Enter key.
Enter times following the 24-hour format. For example,
0800 is 8:00AM, 2000 is 8:00PM.
6 Delayed TX shows Select Location(s) on the display.
7 Enter the desired location using either Speed Dial
numbers or the numeric keypad.
8 Press Start. The machine scans the document(s) into
memory, and waits until the programmed time to begin
transmission.
9 Above process can be repeated for up to x times
(sessions) when memory is available.
x = the number of sessions available to your model fax
machine
Konica FAX 9930, up to 30 sessions.
10 When the memory is full, you can still do one more
transmission. Place the documents in the document tray
and set the machine as instructed in steps 2-7.