Konica Minolta Fax 9930 - Manual (Page 149)

|
Konica FAX 9930 134
Program the Destination Numbers
Collect the contact numbers for the destination machines to
which you will forward the relay fax.
Each number must be programmed into your machine as a
Speed Dial.
See “Programming Speed Dial Numbers.”
Create the Destination Group(s)
The Speed Dial numbers of the contact numbers (of the
destination machines) must be programmed as a group or
groups in your machine.
See “Sending a Fax to Multiple Locations, Group Faxing.”
You must provide the two-digit group number(s) to the relay
initiating station.
Create the Relay Password
To program the Relay Password
1 Press Menu/Exit to enter the menu.
2 Press
ᮢ to select Setup, press Enter.
3 Press
ᮢ to select ID Password, press Enter.
4 Enter the the 4-digit relay password, press Enter.
5 Press Menu/Exit to return to standby mode.
You must provide this password to the relay initiating
station.