Konica Minolta Fax 9930 User Manual
Page 170
|
User’s Manual
155
Distinctive Ring
Speed access no. 67
Some telephone carriers offer a service called Distinctive
Ring. Distinctive Ring lets you have different numbers on
one line, each with its own distinctive ring. You can then use
one number exclusively as a fax number without the expense
of a second line. Your local telephone carrier can provide you
with more information about this service, which usually has
an additional charge.
Available settings are:
OFF (not detected)
ON (detected)
SET (programmed)
The default setting is OFF.
!
You must have your local telephone carrier’s Distinctive
Ring service.
!
Your fax machine must be in FAX or PC answer mode,
and the PBX dial parameter must be set to OFF. Other
modes—TEL, TEL/FAX, or TAD—will override
Distinctive Ring.
!
This feature may not work properly if you have a
telephone other than a genuine Konica optional
handset connected to your fax machine.
Setting Distinctive Ring
To set up your fax machine to recognize another ring pattern:
1 Press the Menu/Exit key to enter the menu.
2 Enter speed access number 67.
3 When the display shows the parameter you want, press
ᮢ
or
ᮡ to select the setting, press Enter.
4 Press Menu/Exit to return to standby mode.