Konica Minolta Fax 9930 User Manual
Page 101
|
Konica FAX 9930
86
Stopping a Transmission
To stop a transmission while it is in progress:
1
Press the Stop key twice.
The display shows
STOPPED.
2
If documents are stuck partway through the document
feeder, you may see a
RELOAD DOCUMENT message on
the display. Press the Stop key again. The machine feeds
the document the rest of the way through the document
feeder.
Receiving Faxes Manually
If you machine is set to the manual receive (TEL) mode,
follow the instructions below to receive faxes. You need to
have an optional handset installed, or an external handset
connected.
1
When your telephone or fax machine rings, pick up the
handset. If a person is on the line, carry on your
conversation.
2
If a signal from a remote fax machine is heard, or if a
person wishes to fax you a document after a
conversation, press the Start key.
3
When the
RECEIVING message appears on the display,
hang up the handset. The machine will emit a tone
following disconnection, telling you that the
transmission was successful.