Kawai Concert Performer Series Digital Piano CP117 - Manual (Page 67)

Recording a Song P. 61
Copy
The Copy function allows you to copy a section or all of the data on a track to another location.
The destination may be on the same track, or it can be on another track.
• The destination of the copied data must either be:
1) A location that already has data in it.
2) The first blank bar after the end of a track (Bar 1 if the destination track is empty).
For example, if a track only has 10 bars in it, you cannot copy data onto bar 20. You can, however,
copy data to bars 1 through 11.
• Copied data replaces any current data that may be at the destination.
R2 Selects the destination track. Use the Dial
to select the track number 1-16, Tempo, or
Chord.
R3 Selects the bar in the destination track where
the copied data will be placed.
F1 Returns you to the Advanced Recorder menu.
F2 Undoes the copying. This option is not always available.
F7 Proceed with copying.
L 1
L 2
L 3
L 4
L 5
F 1 F 2 F 3 F 4 F 5 F 6 F 7
R 1
R 2
R 3
R 4
R 5
L2 Selects the track to be copied. Use the Dial to
select the track numbers 1-16, Tempo, or Chord.
L3 Selects the bar where the data that you are
copying starts. Use the Dial to change the bar
number.
L4 Selects the bar where the data that you are
copying ends. Use the Dial to change the bar
number.