Kawai Concert Performer Series Digital Piano CP117 - Manual (Page 16)

Kawai Concert Performer Series Digital Piano P. 10
Splitting the keyboar d.
When the LEFT/SPLIT Part is activated, the CP automatically splits the keyboard and only the
sound assigned to the LEFT/SPLIT Part will be heard when you play below a specified key (split
point) on the keyboard. The default split point is between F2 and F#2 but you can freely change the
split point to any key on the keyboard.
To change the split point:
1) Press the LEFT/SPLIT button to activate the LEFT/SPLIT Part. The LEFT/SPLIT button LED will light
and the LCD screen will display a diagram of the CP’s 88 note keyboard.
2) Press the LEFT/SPLIT button again, and while holding it down, press the desired key on the keyboard
that you want to serve as the split point. The key you pr ess will become the lowest note the Right
hand Parts will play (RIGHT1 and RIGHT2). The LEFT/SPLIT sound will be heard when keys below
the split point are played.
You may also use the L4 and R4 buttons to move the split point. On the LCD scr een the split point
marker will move across the 88 note keyboard diagram as you press these buttons.
• Moving the split point completely to the LEFT end of the keyboard will allow the LEFT/SPLIT
Part to function as a layer with the two right hand Parts. In this manner you can create a three-
part layer across the entire keyboard.
L 1
L 2
L 3
L 4
L 5
F 1 F 2 F 3 F 4 F 5 F 6 F 7
R 1
R 2
R 3
R 4
R 5
L4 Lowers the split point. R4 Raises the split point.